WAGO uses cookies to provide you the best service. If you continue to browse the page, you agree to the cookie usage.

| Products | Product catalog | Rail-mounted terminal block systems | Products | Product catalog | Rail-mounted terminal block systems | Overview

DIN rail terminal blocks

DIN rail terminal blocks +

*To prevent damaging the gold layer, 30 VDC switching voltages and 50 mA currents shall not be exceeded. Higher switching power eventually evaporates the gold layer. The resulting deposits in the housing may reduce the service life.

Short description:

WAGO's DIN-35-rail-mount 858 Series Relay Sockets are designed for conventional industrial relays with standard pin spacing. The sockets carry 33.5 to 35.5 mm-high relays equipped with two or four changeover contacts. All socket contacts feature two conductor entries at each Push-in CAGE CLAMP® COMPACT connection point for either 2 x 0.34 mm² (22 AWG) to 1.5 mm² (16 AWG) or 1 x 2.5 mm² (12 AWG) cross-section. Push-in CAGE CLAMP® COMPACT Spring Pressure Connection Technology provides simple, push-in termination of solid or ferruled conductors 0.5 mm² (20 AWG) and larger. Speedy socket service: rapidly replace relays without removing conductors.

[..] Read more!
Products in Category: Rail-mounted terminal block systems
  • TOPJOB<sup>®</sup>S rail-mounted terminal blocks with Push-in CAGE CLAMP<sup>®</sup>
    TOPJOB®S rail-mounted terminal blocks with Push-in CAGE CLAMP®
    • Universal connection for all conductor types
    • Simple, push-in terminations of solid and ferruled conductors
    • Integrated test ports for 2mm Ø test plugs
    • 600V to UL 1059
    • 100% protected against mismating
    • Coding option available
  • COMPACT rail-mounted terminal blocks
    COMPACT rail-mounted terminal blocks

    The TOPJOB® S Quadruple-Deck Terminal Blocks are ideal for electric motor wiring applications. Special versions are also available, including a terminal block without ground contact and only two potentials. These terminal blocks were custom designed to support additional functions, such as engine brakes or temperature sensors. Furthermore, WAGO's rail-mount terminal blocks are approved for both 800 V (IEC) and 600 V (UL) ratings.

  • MINI rail-mounted terminal blocks
    MINI rail-mounted terminal blocks

    The WAGO MULTI CONNECTION SYSTEM MAXI with pin spacing of 7.62 mm/0.3 in., for conductor sizes from 0.5to 10 mm² can handle up to 41A. For wire-to-board and wire-to-wire connections. And there's more: based on UL 1059, the male and female connectors with conductor termination can handle up to 600V.

  • topJob® terminal blocks
    topJob® terminal blocks
    • Modular terminal blocks with push-button actuated CAGE CLAMP®
    • Also available with Ex e approval
    • Set to metric or inch pin spacing by compressing terminal strips together or pulling them apart
    • Ideal for in-the-field wiring thanks to simplified push-button actuation
    • Convenient, tool-free operation
  • FIT CLAMP rail-mounted terminal blocks with IDC connection
    FIT CLAMP rail-mounted terminal blocks with IDC connection

    IP20, with strain relief housing

    (These compact connectors are not designed for use in open, easily accessible areas)

  • Rail-Mounted Terminal Blocks, Classic
    Rail-Mounted Terminal Blocks, Classic

    All connectors for fixed installations (snap-in versions for lighting fixtures or devices, female locking latch all types of PCB and distribution connectors) are factory-equipped with locking levers to ensure plugs and sockets are securely locked. Additional locking levers are only required for “flying leads” (plug/socket).

  • High-Current Rail-Mounted Terminal Blocks
    High-Current Rail-Mounted Terminal Blocks
    • High-current terminal strips with lever-actuated CAGE CLAMP®
    • Tool-free opening and closing – fingers open/close levers
    • Several clamping units can be held open simultaneously – convenient for terminating multi-core cables
    • Two solder pins per contact point for high mechanical stability
    • 600V UL for 12.5mm pin spacing
  • Modular terminal blocks and terminal strips for surface mounting
    Modular terminal blocks and terminal strips for surface mounting

    The MULTI CONNECTION SYSTEM (MSC) MIDI Classic for pin spacing of 5 mm/0.197 in.; 5.08 mm/0.2 in.; 7.5 mm/0.295 in. and 7.62 mm/0.3 in is the most versatile system in the MCS program. MCS-MIDI connectors feature lateral locking levers or screw flanges to prevent accidental disconnection. The classic version is designed for wire-to-board, wire-to-wire, board-to-board and board-to-wire connections up to 16A. This system allows group arrangement of female connectors in a single header without loss of pin spacing and is also available with strain relief plates or housings. Besides the THR versions, other versions with integrated push-buttons are also available.

  • Patching systems and busbar terminal blocks
    Patching systems and busbar terminal blocks

    All WINSTA® components are 100% protected against mismating in terms of:

    a.) plugging different number of poles

    b.) plugging when turned by 180°

    c.) plugging when laterally staggered

    d.) plugging one pole

  • Shield Connecting System
    Shield Connecting System

    IP20, with strain relief housing

    (These compact connectors are not designed for use in open, easily accessible areas)

  • Accessories
    Accessories

    approx. 1mΩ contact resistance

    approx. 0.25mΩ contact transition plug/socket

TOPJOB®S rail-mounted terminal blocks with Push-in CAGE CLAMP®

  • Universal connection for all conductor types
  • Simple, push-in terminations of solid and ferruled conductors
  • Integrated test ports for 2mm Ø test plugs
  • 600V to UL 1059
  • 100% protected against mismating
  • Coding option available

COMPACT rail-mounted terminal blocks

The TOPJOB® S Quadruple-Deck Terminal Blocks are ideal for electric motor wiring applications. Special versions are also available, including a terminal block without ground contact and only two potentials. These terminal blocks were custom designed to support additional functions, such as engine brakes or temperature sensors. Furthermore, WAGO's rail-mount terminal blocks are approved for both 800 V (IEC) and 600 V (UL) ratings.

MINI rail-mounted terminal blocks

The WAGO MULTI CONNECTION SYSTEM MAXI with pin spacing of 7.62 mm/0.3 in., for conductor sizes from 0.5to 10 mm² can handle up to 41A. For wire-to-board and wire-to-wire connections. And there's more: based on UL 1059, the male and female connectors with conductor termination can handle up to 600V.

topJob® terminal blocks

  • Modular terminal blocks with push-button actuated CAGE CLAMP®
  • Also available with Ex e approval
  • Set to metric or inch pin spacing by compressing terminal strips together or pulling them apart
  • Ideal for in-the-field wiring thanks to simplified push-button actuation
  • Convenient, tool-free operation

FIT CLAMP rail-mounted terminal blocks with IDC connection

IP20, with strain relief housing

(These compact connectors are not designed for use in open, easily accessible areas)

Rail-Mounted Terminal Blocks, Classic

All connectors for fixed installations (snap-in versions for lighting fixtures or devices, female locking latch all types of PCB and distribution connectors) are factory-equipped with locking levers to ensure plugs and sockets are securely locked. Additional locking levers are only required for “flying leads” (plug/socket).

High-Current Rail-Mounted Terminal Blocks

  • High-current terminal strips with lever-actuated CAGE CLAMP®
  • Tool-free opening and closing – fingers open/close levers
  • Several clamping units can be held open simultaneously – convenient for terminating multi-core cables
  • Two solder pins per contact point for high mechanical stability
  • 600V UL for 12.5mm pin spacing

Modular terminal blocks and terminal strips for surface mounting

The MULTI CONNECTION SYSTEM (MSC) MIDI Classic for pin spacing of 5 mm/0.197 in.; 5.08 mm/0.2 in.; 7.5 mm/0.295 in. and 7.62 mm/0.3 in is the most versatile system in the MCS program. MCS-MIDI connectors feature lateral locking levers or screw flanges to prevent accidental disconnection. The classic version is designed for wire-to-board, wire-to-wire, board-to-board and board-to-wire connections up to 16A. This system allows group arrangement of female connectors in a single header without loss of pin spacing and is also available with strain relief plates or housings. Besides the THR versions, other versions with integrated push-buttons are also available.

Patching systems and busbar terminal blocks

All WINSTA® components are 100% protected against mismating in terms of:

a.) plugging different number of poles

b.) plugging when turned by 180°

c.) plugging when laterally staggered

d.) plugging one pole

Shield Connecting System

IP20, with strain relief housing

(These compact connectors are not designed for use in open, easily accessible areas)

Accessories

approx. 1mΩ contact resistance

approx. 0.25mΩ contact transition plug/socket

  • Newsletter Subscription
  • How may we help?
  • Add to bookmark list
en
The document could not be added to the bookmark list.
Item was added to the bookmark list successfully.
Page was added to the bookmark list successfully.
Digital Media was added to the bookmark list successfully.
Document was added to the bookmark list successfully.
../../../../navigation-complete.html